Technical data

MEASURING AND TESTING EQUIPMENT
884
15
TAPE RETENTIVITY TESTER
CNS-11888, GB/T4851
PLASTIC, RUBBER, FOOTWEAR
LEATHER AND TEXTILE
GT-7100-MI
MELT FLOW INDEXER
ASTM-D1238, D3364, ISO-1133, JIS-K7210, GB/T3682
This tester covers
measurement of the
rate extrusion of molten
resins.
Specication
Temperature Control
Room Temp.~300°C (Accuracy ±0.1°C). PID
Control, Include Overheat Protection
Load (gr)
325, 1000, 1200, 2160, 3800, 5000, 7160, 100000,
12500, 21600 (Equipped With One Of Them)
Motor (W) 30
Auto Cuto Device
Auto/Manual Selection, Time Interval 0.1~999.9
Min .
Accessories
•MercuryThermometers,150°C,200°C,
250°C, 300°C (Equipped With One Of Them)
•BrushforCleanTheDie
•BrushforCleaningCloths
•Reamer
•Speculum
•BakeliteFunnelForSpecimenEntrance
•WeightRodForPressing
•CylinderGauge
Dimension (WxDxH) (cm) 40 x 51 x 60
Weight (kg) 42 (Without Weights)
Power 1ph, AC 220V, 5A
Order No. Type Description
KH0000350 GT-7100-MI Melt Flow Indexer
MOLDING TEST PRESS
This machine is very convenient for preparing test plastic specimen,
rubber, injection and extrusion simulation.
Specication
Capacity 10, 30, 50 Ton Optional
Temp. (°C) room temp. ~ 300
Timer LED, 0.01 sec. ~ 999hr
Heat Plate Area (mm) 315 x 288
Cooling Method Water (Optional)
Dimension (WxDxH) (cm) 100 x 70 x 150
Weight (kg) 765
Power 3ph, 4W, AC 380V, 20A
Order No. Type Description
KH0000150/
KH0000185
GT-7014-A Molding Test Press
GT-7014-A
GT-7090
Measure the distance of slide of the tape after a certain time.
Specication
Load 1 kg, 5 Pieces
Sampling 5 sets, Individual Timing
Battery Timer 1~999,999Min.
Dimension (WxDxH) (cm) 45 x 20 x 63
Weight (kg) 32
Order No. Type Description
KH0000014 GT-7090 Tape Retentivity Tester