Technical data

www.kawanlama.com
883
MEASURING AND TESTING EQUIPMENT
TENSILE AND IMPACT TESTER
GT-7045-MD
IZOD CHARPY DIGITAL IMPACT TESTER
ISO-179, 180, ASTM D256, D6110, GB/T1843, 1043
This tester is used to test the impact-
resistance of specimen of various
materials which is endured the impact
in a certain angle and weigth to access
its toughness. After test, test result
are calculated/ saved automatically,
displayed and printed out (single or
multiple printing). Impact action is
simple by pressing a control button.
Specication
Capacity Optional
(1)ZOD (1J, 2.75J, 5.5J) and CHARPY
(1J,2.75J, 5.5J)
(2)ZOD (1J, 2.75J, 5.5J) and
CHARPY(1J,2J,4J,5J)”
Impact Speed (m/sec) 2.9, 3.46
Impact End to Shaft Center (cm) 22.96, 32.7
Drop Angle 150°
Energy Unit
kg-cm, kg-m, Ib-ft, J
(or dened by user)
Angle Display Resolution 0.05°
Energy Display Resolution 0.01J
Printing By PL-16 Printer
Dimension (WxDxH) (cm) 60 x 32 x 78
Weight (Approx.) (kg) 180
Power 1 ph, AC 220V, 50/60Hz
Order No. Type Description
KH0000448 GT-7045-MD Izod Charpy Digital Impact
Tester
GT-7052
CHARPY IMPACT TESTER
It measures the energies absorbed
by the specimens of various metallic
materials after impacting at a speci-
ed angle and dened weight so as
to determine their toughness.
Specication
Capacity (optional) (kg-m) 30 50
Swing Angle 146°
Min. Graduation 1°
Hammer Weight (kg) 30 (approx.)
Impact Speed (m/sec) 5.18
Impact Center Length (mm) 750±5
Shaft Center Height (mm) 1100
Dimension (W x D x H) (cm) 142 x 60 x 128
Weight (kg) 300 350
Specimen JIS No.3, No.4, No.5
EXTENSOMETER
GT-U33
It’s specially designed for the measure
elongation between 0 - 5mm or
specied (optional) for the dumb-bell
specimen
HYDRAULIC CLAMPING EQUIPMENT
GT-U35
This equipment adapts a
hydraulic driving system
of clamping equipment
Order No. Type Description
KH0000393 GT-U33 Extensometer
Order No. Type Description
KH0000497 GT-U35 Hydraulic Clamping Kit F/Gt-7001
Order No. Type Description
KH0000298 GT-7052 Charpy Impact Tester
GT-7052-D50
CHARPY DIGITAL IMPACT TESTER
It is used for determining the energy absorbed by a specimen of various
metallic materials after being impacted by a specied weight at a given
angle so that you may estimate the toughness of various metallic
materials. It will calculate the impact energy of tested meterial by use of
precise encoder and microcomputer.
Item Specication
Method Charpy
capacity 50 kg-m
Drop Angle 104°
Distance From Striker’s Edge To Shaft
Center
85cm
Impact Speed 5.42m/s
Gap Of Specimen Support 40mm
Radius of Specimen Support 1~1.5mm
Radius of Striker’s Edge 2~25mm
Arc of Striker’s Edge 30°