Technical data

www.kawanlama.com
861
MEASURING AND TESTING EQUIPMENT
COATING AND MATERIAL ANALYSIS
COATING THICKNESS GAUGE
Coating Thickness Gauge Ferrous
Features:
• IntegratedprobeF
• Magneticinductionmeasuringprinciple
• Anynon-magneticcoatingonferrous 
substrates
• Measurementmodes:continous/single
• Automaticlyshut-o
• Automaticcalculation:
mean/max. /min/no./S.Dev
Accessories:
• Charger 1
• Calibrationfoilset 1
• Pocketcase 1
• Instructionmanual 1
• Carryingcase 1
Order No. Type Description
KW0600329 KW06-329 Coating Thickness Gauge Ferrous
Specication
Measuring Range (µm) 0~1250
Resolution (µm) 1
Accuracy (µm) Zero-Point Calibration ±(3%H+1)
(H=Nominal Value) (µm) Two Point Calibration ±(1%~3%H+1)
Statistics
Average (MEAN), Max., Min., Number
of Measurements (NO)., Standard
Deviation (S.Dev)
Sample (mm)
Min. Radius Workpiece: Convex 1.5
Min. Measuring Area : 7 Diameter
Min. Sample Thickness: 0.5
Operating Temperature (
°
c) 0~40
Power Supply (v) NiMH Battery 3.6
Dimensions (mm) 150 x 53 x 22
Weight (gr) 150
FERROUS
Features:
•IntegratedprobeN
•Eddycurrentmeasuringprinciple
•Anyinsulatingcoatingonnon-ferrous
conductible substrates
•Measurementmodes:continuous/single
•Automaticcalculation:mean/max../min./no./s.dev
•Automaticshuto
Accessories:
•Charger  1
•Calibrationfoilset 1
•Pocketcase 1
•Instructionmanual 1
•Carryingcase 1
Order No. Type Description
KW0600330 KW06-330
Coating Thickness Gauge
Non Ferrous
Specication
Measuring Range (µm) 0~1250
Resolution (µm) 1
Accuracy (µm) Zero-Point Calibration ±(3%H+1.5)
(H=Nominal Value) (µm) Two Point Calibration ±(1%~3%H+1)
Statistics
Average (MEAN), Max., Min., Number of
Measurements (NO)., Standard Devia-
tion (S.Dev)
Sample (mm)
Min. Radius Workpiece: Convex 3.0
Min. Measuring Area : 5 Diameter
Min. Sample Thickness: 0.3
Operating Temperature (
°
c) 0~40
Power Supply (v) NiMH Battery 3.6
Dimensions (mm) 150 x 53 x 22
Weight (gr) 150
NON FERROUS
WET FILM THICKNESS GAUGE
Durable Stainless Steel
Wet Film Gauge
•small “foot print”
 •milsandmicrons
 •16measuringpoints
Scale Graduations
microns mils
25 50 75 100 1 2 3 4
125 150 175 200 5 6 7 8
250 300 350 400 10 12 14 16
500 600 700 800 20 24 28 32
SurfaTest
Coating thickness
Measurement
Coating Thickness Gauge Non Ferrous