Technical data

www.kawanlama.com
859
MEASURING AND TESTING EQUIPMENT
DUALSCOPE FMP40
Features :
• LargeLCDDisplayformeasurementandevaluationdataaswellas
icons for status display and operation notes on display
• Automaticmaterialrecognition
• Simplecalibration
• UseAClIne
Dualscope FMP40 is an equipment to
measure coating thickness with base
material ferrous and non ferrous. This Unit
can measure coating of paint, lacquer, zinc,
chromium, copper, paint. The probe can be
change which application eld
Order No. Description
FI0000155 604-286 FMP40 Dual Scope
Shape Model
Measurement
Range
Order No.
FGAB
0-2000m
0-80mils
604-141
FAW3.3
0-2000m
0-80mils
604-178
FGABI
0-1000m
0-40mils
604-175
FTA3.3H
0-1200m
0-48mils
604-142
FAW3.3
0-1200m
0-48mils
604-193
FAI3.3-
150
0-800m
0-32mils
604-187
FD10
FDX13
NF/Fe
0-1100m
0-44mils
Iso/NF
0-800m
0-32mils
604-143
604-169
ISOSCOPE FMP30 - DELTASCOPE FMP30
Features :
• TheMP30modelsofthehand-heldcoatingthicknessmeasuringinstrumentsare:
•ISOSCOPE®MP30modelsareusedtomeasurenon-conductivecoatingssucha
paint, anodizing, enamel or plastic coatings on non-ferrous metals, and anodic
coatings on aluminium
•DELTASCOPE®MP30modelsareusedtomeasurenon-ferrousmetalcoatings
(e.g., chromium, copper, zinc, etc.), and paint, enamel,
or plastic coatings on iron and steel
Order No. Type Description
- 604 - 299 Isoscope FMP 30 w/o Probe
- 604 - 297 Deltascope FMP 30 w/o Probe
Characteristic feature
1. AC line connection is possible as an alternative to battery operation.
2. Large LCD display formeasurement and evaluation data as well as icons
for status display and operation notes on display lines
3. Automatic probe recognition
4. Statistical Evaluation of measurement series and display of minimum, maximum
mean value, number of measurements, standard deviation, and date and time
5. Simple calibration adjustment to the test area geometry with the ZERO key
PHASCOPE
Copper Coating Measurements For PC-Board Production :
Available probes:
• ESL080BandESL080VforCuthicknessmeasurements
in PC-board boreholes.
• ESD20CuforsurfacecopperthicknessmeasurementsonPC-boards.
Phascope PMP10 utilizes the phase-sensitive
eddy-current method according to the standard
ISO 21968. Compared to conventional eddy-current
method according to ISO 2360, this measuring
method has signicant advantages for the thickness
measurement of metallic surface coatings.
By using the phase position of the probe signal instead
of amplitude for the coating thickness compulation,
the interfering inuence of the specimen shape and of
the probe lift-o are signicantly reduced.
Measurement of NFe Metal Coatings on Steel,
NF or Iso Substrate Materials:
Available probes:
• ESD20CuforthemeasurementofNFcoatingsofCu,Al,brass,etc.on
electronic non-conducting substrate materials
• ESD20ZnforNFcoatingsonsteeloriron,inparticularwith 
rough surface
• ESD20NiforNi/Fe
• ESD2.4forZn/Feonsmallparts
COATING AND MATERIAL ANALYSIS