Technical data

www.kawanlama.com
847
MEASURING AND TESTING EQUIPMENT
WELDING GAUGE
HARDNESS AND CONCRETE
Feature :
Concrete testing with original SCHMIDT Hammer is the most frequently
used method worldwide for non- destructive testing of concrete and
structural components. Measuring range 10 to 70 N/mm compressive
strength. Rebound values are recorded as a bar chart on a paper strip. One
roll of paper strip oers room for 4000 test impact.
Type Dimension (mm) Weight (kg)
Case type N/L/LB 325 x 125 x 140 1.6 / 1,4 / 1,4
Case type NR/LR/P/PT/PM 330 x 300 x 110 2,9 / 2,7 / 3,2 / 3,2 / 3,2
Case type M 745 x 145 x 195 12
Concrete Test Hammer type NR is an equipment to measure hardness
of concrete and this equipment can record the result of measurement.
Order No. Type Description
PC0000005 31002000 Concrete Test Hammer Type NR
Feature :
Concrete testing with original SCHMIDT Hammer
is the most frequently used method worldwide for
non-destructive testing of concrete and structural
components.
Measuring range 10 to 70 N/mm compressive strength.
These types are used for testing thin walled ( < 100 mm)
or small components but also cast stone components
sensitive to impact.
Type Dimension (mm) Weight (kg)
Case Type N / L / LB 325 x 125 x 140 1.6 / 1,4 / 1,4
Case Type NR/LR/P/PT/PM 330 x 300 x 110 2,9/2,7/3,2/3,2/3,2
Case Type M 745 x 145 x 195 12
Concrete test Hammer Type L/LR is used to measure
hardness of Concrete. This Equipment is used to measure
concrete which the thickness of concrete is less than 100
mm. Type L Can not record the result of measurement but
type LR can Record the result of measurement.
Order No. Type Description
PC0000002 31003000 Concrete Test Hammer Type L
PC0000003 31004000 Concrete Test Hammer Type LR
Feature
:
Concrete testing with original SCHMIDT Hammer is the most frequently
used method worldwide for non-destructive testing of concrete and
structural components. Dimensions and impact energy as for type L.
The impact plunger tip is a special design. This type is used for red clay
products.
Concrete Test hammer type LB is used to measurement hardness of red
clay product
Order No. Type Description
PCZ000004 31003001 Concrete Test Hammer Type LB
CONCRETE TEST HAMMER TYPE NR
CONCRETE TEST HAMMER TYPE L/LR
CONCRETE TEST HAMMER TYPE LB
Features :
• Portable equipment which can use in any eld condition
• Minimalize waste of time because easy to use
• Simple to calibrate
Type Dimension (mm) Weight (kg)
Case type N / L / LB 325 x 125 x 140 1.6 / 1,4 / 1,4
Case type NR/LR/P/PT/PM 330 x 300 x 110 2,9/2,7/3,2/3,2/3,2
Case type M 745 x 145 x 195 12
Concrete test hammer type N
is an equipment to measure
hardness of concrete. This
Equipment use for concrete
which the thickness is more
than 100 mm
Order No. Type Description
PC0000004 31001001 Concrete Test Hammer N
CONCRETE TEST HAMMER TYPE N