Technical data

MEASURING AND TESTING EQUIPMENT
836
15
HR-511
HR-521
HR-522
HR-523
Various shapes of specimen
can be measured. (Nose-type
indenter axis mechanism has
been adopted)
The nose-type indenter mechanism
allows measurement of pipe
samples as well as the top surface
of a at sample.
Functions : Touch screen type
•Touch screen operation with a back-lit •
LCD graphic display.
•Remote selection of the test force
linked to the hardness scale selction.
•Choice of massage language in English,
German, French, Spanish, Italian and
Japanese for user friendly operation.
•Cylindrical and spherical surface com-
pensation.
•Data oset.
•Conversion to other hardness scales.
•Powerful statistical processing with ex-
ible data point editing and 1024 data
memory.
•Measured data editing.
•OK/+NG tolerance
judgment.
•Statistical processing,
histogram and X-R
chart.
Function : Control unit
Durable sheet switch type
•Durable sheet switch operation
with LED display.
•Remote selection of the test
force linked to the hardness
scale selection.
•Powerful statistical processing
and 1024 data memory.
•Data oset.
•OK / NG tolerance judgment.
•Statistical processing.
HM-211
Micro-Vickers Hardness Testing Machine
When integrated with the HM200 series
combined with the automeasuring unit
and the auto-position unit, this unit allows
all the necessary operations of hardness
testing to be automatically and speedily
performed.
*Factory-installed option
When integrated with the HM200 series
combined with automeasuring unit,
this unit can achieve both enhanced
measurement eciency and reduced
measurement variation due to human
errors at the same time, thanks to the
automatic indentation reading function
and the automatic stage control function
which is helpful for multiple point
measurement of hardness
When integrated with the HM200 series,
this unit helps reduce human errors
in measurement as it automatically
measures the diagonal the indentation
and calculates the hardness value.
When integrated with the HM200 series,
this unit can reduce human errors in
measurement with the eye.
Video
Monitor
CCD
Camera
Video camera unit 810-354
CCD
Camera
Camera
adapter
Frame grabber
Software
Auto measuring unit (810-355-1)
PC*
*It is available
only for systems
designated for
Japan.
Auto
Auto Position unit (810-356)
Automatic XY stage
PC-AT driver unit
PC
Motor control
board/digital I/O
Auto-position
unit
Auto focus unit (810-357)
AF auto-stage
Lens tube unit(focus pattern)
Joystick
Joystick board
PC
PC-AT driver unit
HM-211:810-352
HM-221:810-353
*1: When building in the video camera unit, remove the eyepiece unit of the measuring microscope (standard accessory). If the Auto-measuring unit
is added, it will be exclusively used in place of the measuring microscope or video camera unit. For the exclusive use of the Auto-measuring unit or
video camera unit, an optional camera power unit (Order No.19BAA360) is required. If the Auto-focus unit is added, the focus line is visible within the
view eld of the measuring microscope.
*2: The XY stage (digital type, standard accessory) is dismounted if the Automatic XY stage is to be used. Therefore, if the Auto-position unit is added
and only the hardness tester is used, XY position data cannot be obtained.
HR-511
Rockwell Type Hardness Testing Machine
Feature :
Multiple test force generation for Rockwell, Rockwell Supercial and
Brinell hardness. Dolphin-nose indenter arm for easy reach of interior (min.
ø40mm/ø22mm*) and exterior surfaces). Real time electronic test force
control for accurate loading. This perfectly eliminates load force overshoot-
ing. Indenter escape function for continuous testing at xed table position.
This eliminates instability caused by the table retraction. Auto-shop eleva-
tion table and automatic preliminary test force loading to provide stable
test force generation.
Benets :
• HighAccuracy
• HighPrecision
HARDNESS AND CONCRETE