Technical data

www.kawanlama.com
829
MEASURING AND TESTING EQUIPMENT
HR-210MR
Rockwell/Rockwell Supercial Hardness Testing Machine
Features :
•Thenewlydesignedframe,withelevatingscrew,doesnotstickoutin
the lower part of the amin body. A at table can be used to place the
frame for the test equipment
•Simplicityoperation
•Withanaloguetype(HR-110MR,HR-210MR),thegaugepresseting
operation is unnecessary by the adoption of an automatic presseting
dial gauge
Specicaton
Model HR-210MR
Applicable Model Rockwell Hardness
Standard JIS B 7726 ISO6508-2 ASTM E18
Display Analog
Minimum Reading 0.5HR Graduation
Preliminary Test Force
(Handling Support)
Automatic Pre-Setting Dial Gauge
Test Force Setting Weight Change
Load Control Electromotion (Motor Drive) Button Start
Load Duration Fixed 3-5.5s or Manual
Max. Specimen
Height
180mm
(100mm: The Case of Cover Attaching)
Max. Specimen Depth
165mm
(From Indenter Axis Test Equipment Body)
Function -
Data Output -
Power Supply AC100-2401.2A (Adapter DC12V3.5A
Dimensions Approximately 235 (W) x 512 (D) x 780 (H)mm
Mass Approximately 47kg
Economical
Dial Type
Rockwell
Hardness
Tester
HR-320MS
Rockwell/Rockwell Supercial Hardness Testing Machine
Feature :
The digital type (HR-320MS, HR-430MR and HR 430MS) has digimatic
output, digital processors and digital equipment, as well as our digimatic
mini-processors (DP-1VR) to print and input tools (USB-ITN-E) to connect
to PC and use for data transfer.
HARDNESS AND CONCRETE
Economical
Rockwell
Brinell
Hardness
Tester
Rockwell hardness tester
Manually put on weight change (with all test force selected) and the
handling of preliminary test force. It is the motor drive that loads sequence
of all the test force.
Specicaton
Model HR-320MS
Applicable Model
Rockwell Hardness
Rockwell Supercial Hardness
Standard JIS B 7726 ISO6508-2 ASTM E18
Display Digital
Minimum Reading 0.1HR Indication
Preliminary Test Force
(Handling Support)
Loading Navigator Indication
Test Force Setting Weight Change
Load Control Electromotion (Motor Drive) Button Start
Load Duration Fixed 3-5.5s or Manual
Max. Specimen
Height
180mm
(100mm: The Case of Cover Attaching)
Max. Specimen Depth
165mm (From Indenter Axis Test Equipment
Body)
Function
Success or Failure Decision Function
Oset Revision Function
Hardness Conversion Function
Data Output SPC RS-232C
Power Supply AC100-2401.2A (Adapter DC12V3.5A
Dimensions Approximately 235 (W) x 516 (D) x 780 (H)mm
Mass Approximately 47kg
Twin type (rockwell/rockwell supercial
combined use) hardness test equipment
Manually handles test force and preliminary test force of the weight
change. Motor drive loads sequence of all the test force.