Technical data

MEASURING AND TESTING EQUIPMENT
828
15
ABK-1
Hydraulic Brinell Hardness Testing Machine
Feature :
ABK-1 is a hydraulic Brinell hardness testing machine that is simple to
operate and has high precision. This machine is suitable for hardness
testing of raw materials, cast/forged components, and special steels.
The mount table up/down handle uses a thrust bearing, providing smooth
up/down operation.
A large impression can create a smooth surface even when measuring
on rough surfaces. Weight are divided so that a test force from 4923N
(500kgf) to 29420N (3000kgf) can be applied. Two sizes of steel indenters,
10mm and 5mm, can be used according to the specimen
Benets :
• HighAccuracy
• HighPrecision
Specication
Model ABK-1
Test Force
4903, 7355, 9807, 14710, 19614,
24517, 29420N
Test Force Conversion Manual Method
Test Force Control Manual ( Load,Duration, Unload)
Test Force Duration Time Manual (Arbitrary)
Specimen Dimension
Max. Imum Height (mm) 200
Max. Imum Depth (mm) 155
Dimensions (WxDxH) (mm) 430 x 510 x 1100
Mass (kg) 180
Test Force Range (N) 4903 – 29420
HARDNESS AND CONCRETE
Economical
Use of
Brinell
Hardness
Tester
ASH
Shore Hardness Testing Machine
Feature :
The Shore hardness testing machine is designed for easy hardness
measurement where test machine and test method must be in compliance
with the JIS standard. It is suitable for hardness testing of large, heavy and
dicult to move items such as rolls and for hardness measurement of nal
nish surfaces. It has compact body that is easy to move. By removing the
measurement tube, it can be used to directly measure the hardness of the
specimen. Easy to operate, allowing quick measurement. The depth of
indentation so that it can be used for product inspection. A wide range of
measurement is available from small specimens to large specimens, with
more applications possible by using special accessories such as the swing
arm or roll testing stand.
Benets :
• HighAccuracy
• HighPrecision
Specicaton
Model ASH-D0 ASH-D1
Measurement Target General Roll
Standard JIS D 7727 JIS D 7727
Dial Range/Graduation
0 – 140HS / 1HS 0 – 140HS / 1HS
Tolerance (Mean Value) ±1.5 (35 to 95HS) ±1.0 (30 to 100HS)
Tolerance (Dispersion) 1.5 (less than 75HS)
2.0 (75HS or more)
1.5 (30 to 100HS)
Specimen Max.
Height (mm)
70 70
Specimen Max.
Depth
45mm (From the
Center of The Indenter
Axis)
45mm (From the
Center of The
Indenter Axis)
Dimensions
(WxDxH) (mm)
160x170x355 160x170x355
Mass (kg) 16 16
Optional Accessories
19BAA204 :
Used for the measuring of lare components over
100mm that canot be measured by the main
unit framw. It can be used easily by removing
the measurement tube from the frame and
installing it on the tip of the arm instead.
Swing arm
19BAA205 : Roll testing stand
useful for measuring surface hardness of rolls over
100mm and other large workpieces that cannot be
measured by removing the frame. Can be used easily
by removing the measurement tube from the main
unit frame and installing instead
19BAA203 : Hammer drawing tool
used to remove the diamond hammer from the measurement
tube.
19BAA202 : Diamond hammner
Spares are provided as options in the event of accindental
breakage