Technical data

www.kawanlama.com

825

MEASURING AND TESTING EQUIPMENT

OPTIC AND METALLOGRAPHY

GRINDING POLISHING

Grinding/Polishing Machine

Features:

•Accurate turning balance that is not shifting even by force

•Stable body design that does not shake while in use

•Double water proof covers design for safe and simple grinding

and polishing. The work piece does not fall o easily

•Spindle of leak - proof design for smooth operation

•Replaceable grinding and polishing plates that can be replaced

quickly

•Cooling spray whose positioning can be freely adjusted

•Special O-ring rubber design to stabilize sand paper and polish-

ing cloth free of hand injuries caused by ying press covers

•The test piece is xed while the machine rotates for fast and

even grinding and polishing

•Noise level: below 55 decibels within 1.5m from the machine

•Over - current protection: The current output automatically cuts

down in case of over - current to protect the motor

•Grinding and polishing size programmable

<<Quality, Speed, Innovation>>

Recalibrate and reset

Adjust the rotation calibration

to t the size of the work piece

to be grinded and polished.

Attach the work piece on the

surface of the plate

When the calibration is 1,

it means the grinding and

polishing size is 0.1mm

Start rotating, grinding and

polishing

Grinding and polishing

completes. The work piece is

grinded and polished o 0.1mm

Reset Set the size Grind OK

Continue to the