Installation guide

AS-2300TW Installation Guide P. 21
Events playback
The first four playback codes are start failure events. There is a pause after each event code is
played back.
The system will play back the most recent event first, then the second one, and so on. If there is no
event at all to report, the parking lights will give one long flash.
Start Failure Codes through the Parking Lights
1 x = No Start
3 x = Hardware Reset
4 x = Brakes
5 x = No Tach Cut-off
6 x = Hood
7 x = Engine running, no ignition detected, or tach before start
Note: “x” stands for one flash of the parking lights