Installation guide

4
XL202 Programming Guide
© 2014 Directed. All rights reserved.
Introduction
The XL202 is designed to convert RF data into D2D. It is used in conjunction with most of our
Xpresskit interface modules that are equipped with a D2D port and enables the connection
of almost any of our Directed RF kits. The main applications for the XL202 are to allow the
connection of Directed RF to RSR or RXT compatible kit, which allow the control of the OEM
(RXT) or aftermarket (RSR) remote starters.
Compatibility & pairing options
The XL202 offers multiple different firmware’s that enable it to work with legacy and current RF technology.
Before using the XL202 you must ensure that it has been flashed with the correct firmware and that the correct
settings have been selected at the interface module level.
Please reference the table below to determine what is the correct programming procedure (Pairing type).
Brand Remote Specifications
Autostart
Prog. type
1
Remote part #
ASRF-1510FBK
Antenna part #
TW-130 HDR
Firmware
202.RFTDASEH
Prog. type
1
Remote part #
ASRF-3503BK
Antenna part #
TW-130 HDR
Firmware
202.RFTDASEH
Prog. type
1
Remote part #
ASRF-3510BK
Antenna part #
TW-130 HDR
Firmware
202.RFTDASEH
Prog. type
1
Remote part #
ASRA-2510FBK
Antenna part #
SH 433-120 HDR
Firmware
202.RFKASRA
Prog. type
7
Remote part #
ASRS-7503
Antenna part #
6711T SST
Firmware
202.RFTDDEI
Prog. type
7
Remote part #
ASRS-7504
Antenna part #
TW-150 SST
Firmware
202.RFTDASNC
Brand Remote Specifications
AstroStart
Prog. type
1
Remote part #
613-TX
Antenna part #
613-RX
Firmware
202.RFKAFE
Prog. type
1
Remote part #
623-TX
Antenna part #
623-RX
Firmware
202.RFKAFE
Prog. type
8
Remote part #
5225-TX
Antenna part #
5225-RX
Firmware
202.RFKAFS
Prog. type
2
Remote part #
721-TX
Antenna part #
721-RX
Firmware
202.RFKAFF1
Prog. type
1
Remote part #
615-TX
Antenna part #
TW-130 HDR
Firmware
202.RFTDASEH
Prog. type
1
Remote part #
625-TX
Antenna part #
TW-130 HDR
Firmware
202.RFTDASEH