Installation guide

13
XL202 Programming Guide
© 2014 Directed. All rights reserved.
Programming type 8
Compatibilities
Remote part # Antenna part # Firmware
5225-TX 5225-RX 202.RFKAFS
Instructions
1
With UNLOCK ALL option:
Press and release, then press and hold the Programming button of
the XL202 module. The LED flashes slowly.
& &
Press & Hold
XL202
Press & Release
XL202
Flashes
Slowly
With DRIVER DOOR PRIORITY UNLOCK option:
Press and hold the Programming button of the XL202 module. The LED
flashes slowly.
XL202
Press & Hold
XL202
Flashes
Slowly
&
2
Press and hold the P button on the remote until the remote emits a
long tone and the display reads MAIN MENU (arround 4 seconds).
Confirmation
Tones x1
&
&
Screen Display
MAIN
MENU
P
Press &
Hold
3
Press and release the Trunk or Start button until the display reads PAIR.
Screen Display
PAIR
&
Press & Hold
OR
4
Press and release the P button once. The remote display reads CODING.
It is now in Pairing mode.
&
Screen Display
CODING
P
Press & Release
5
Press the Lock button on the remote. Upon successful pairing, the
XL202 LED turns ON solid for one second, then turns OFF to indicate
the pairing was completed successfully. The remote display also reads
PASSED.
Solid
x1 sec
Off
& &
Screen Display
PASSED
&
AUX
Press
6
When programming is finished, release the Programming button on the
XL202.
XL202
Release
XL202
7
Wait 30 seconds for remote to exit programming. All remote lights will be
off when the programming mode has been exited.
Wait
30 secs.