Installation guide

10
XL202 Programming Guide
© 2014 Directed. All rights reserved.
Programming type 5
Compatibilities
Remote part # Antenna part # Firmware
7153V/P/X 6211T 202.RFTDDEI
7251V/P/X 6211T 202.RFTDDEI
7656V/X 6816T 202.RFTDDEI2
7856V/X 6816T 202.RFTDDEI2
Instructions
1
With UNLOCK ALL option:
Press and release, then press and hold the Programming button of
the XL202 module. The LED flashes slowly.
& &
Press & Hold
XL202
Press & Release
XL202
Flashes
Slowly
With DRIVER DOOR PRIORITY UNLOCK option:
Press and hold the Programming button of the XL202 module. The LED
flashes slowly.
XL202
Press & Hold
XL202
Flashes
Slowly
&
2
Hold the Function button on the remote until it emits a long beep
and its LED turns ON solid (approximately 12 seconds).
Confirmation
Tones x1
& & &
AUX
Press &
Hold
AUX
Release
Solid
3
Press and hold the Start button until the remote beeps 3 times and its LED
turns ON solid.
& &
AUX
Press &
Hold
Confirmation
Tones x3
Solid
4
Press the Lock button on the remote. Confirmation tones are heard
upon successful programming, and the XL202 LED turns ON solid for
one second, then turns OFF to indicate the pairing was completed
successfully.
Solid
x1 sec
Off
& &
Confirmation
Tones
&
AUX
Press
5
When programming is finished, release the Programming button on the
XL202.
XL202
Release
XL202
6
Wait 30 seconds for remote to exit programming. All remote lights will be
off when the programming mode has been exited.
Wait
30 secs.