User guide

How Run Time Cycles Work
Table 5
RUN TIME CYCLE
LED #1 will turn
itself off when ...
LED #2 will turn
itself off...
LED #3 will turn
itself off ...
LED #4 will turn
itself off...
4-minute run time
cycle
... the cycle will have
ended.
... 3 minutes into
the cycle.
... 2 minutes into
the cycle.
...1 minute into the
cycle.
9-minute run time
cycle
... the cycle will have
ended.
... 7 minutes into
the cycle.
... 5 minutes into
the cycle.
... 3 minutes into
the cycle.
15-minute run time
cycle
... the cycle will have
ended.
...11 minutes into
the cycle.
... 7 minutes into
the cycle.
... 3 minutes into
the cycle.
20-minute run time
cycle
... the cycle will have
ended.
... 15 minutes into
the cycle.
... 10 minutes into
the cycle.
... 5 minutes into
the cycle.
25-minute run time
cycle
... the cycle will have
ended.
... 19 minutes into
the cycle.
... 13 minutes into
the cycle.
... 7 minutes into
the cycle.
30-minute run time
cycle
... the cycle will have
ended.
... 23 minutes into
the cycle.
... 16 minutes into
the cycle.
... 9 minutes into
the cycle.
Example: If the vehicle was programmed with a run time cycle of 15 minutes and the engine
was running (under a remote start) for 5 minutes (meaning there is 10 minutes left in
the run time cycle), LEDs #1 #2 and #3 would light up. LED #3 will turn itself off
when there will be 8 minutes or less left in the run time cycle.
Multi-Level Features (default state)
Basic features (press the SHIFT button 1X)
SHIFT ¾ LOCK:...............................................................aux 2
SHIFT ¾ TRUNK:.............................................................status request
SHIFT ¾ START/STOP...................................................cold weather
Multi-car operation (press the SHIFT button 2X)
SHIFT ¾ SHIFT ¾ LOCK:............................2
nd
car lock
SHIFT ¾ SHIFT ¾ UNLOCK:.......................2
nd
car unlock
SHIFT ¾ SHIFT ¾ START/STOP:...............2
nd
car start/stop
SHIFT ¾ SHIFT ¾ TRUNK:..........................2
nd
car trunk
Customized features (press the SHIFT button 3X)
(May not be applicable for certain vehicles)
Your installer can add customized features such as turning on the radio, opening sliding doors, etc.
SHIFT ¾ SHIFT ¾ SHIFT ¾ ..........................LOCK: customized feature 1
SHIFT ¾ SHIFT ¾ SHIFT ¾ ..........................UNLOCK: customized feature 2
SHIFT ¾ SHIFT ¾ SHIFT ¾ ..........................TRUNK: customized feature 3
SHIFT ¾ SHIFT ¾ SHIFT ¾ ..........................START/STOP: customized feature 4
Setting transmitter features (press the SHIFT button 4X)
SHIFT ¾ SHIFT ¾ SHIFT ¾ SHIFT:
LOCK:.................................full beep.............................................................(LED #1 flashes)
UNLOCK:............................half beep............................................................(LED #2 flashes)
START/STOP: ....................disable beep......................................................(LED #4 flashes)
TRUNK:...............................save modifications.............................................(LED #3 flashes)
P. 6 User Guide AS-2360TW