Installation guide

Programming Options
MODE 1 * INDICATES DEFAULT SETTING
FUNCTION 1 – Ignition-controlled Door Locks
OPTION 1* Ignition Lock DISABLED
OPTION 2 Ignition Lock ENABLED
OPTION 3 Ignition UNLOCK ONLY
OPTION 4 Ignition LOCK ONLY
FUNCTION 2 – Secure Lock
OPTION 1* Secure Lock DISABLED (1-sec. Disarm
pulse)
OPTION 2 Secure Lock ENABLED in Smart Secure Lock
Mode
OPTION 3 Secure Lock DISABLED (1/2-sec. Disarm
pulse)
OPTION 4 Secure Lock ENABLED in Standard Mode
OPTION 5 Secure Lock (no rearm pulse when ignition and
the ground out when running are ON)
FUNCTION 3 – Starter Kill Passive / Active Arming
OPTION 1* PASSIVE Arming (60 sec.)
OPTION 2 ACTIVE Arming
OPTION 3 PASSIVE Arming (3 min.)
FUNCTION 4 – Door lock pulse timing
OPTION 1* 7/10-sec. lock/unlock pulses
OPTION 2 4-sec. lock/unlock pulses
OPTION 3 7/10-sec. lock pulse and two 1/4-sec. unlock
pulses
OPTION 4 1/10-sec. lock/unlock pulses
FUNCTION 5 – LED flashing
OPTION 1* ENABLED (without starter kill Æ will flash
only when ignition is OFF)
OPTION 2 DISABLED
OPTION 3 ENABLED (with starter kill Æ will flash when
the starter kill engages. This option should be
selected ONLY if the starter kill is installed.)
MODE 2 * INDICATES DEFAULT SETTING
FUNCTION 1 – Safe Start.
OPTION 1 Safe Start ENABLED
OPTION 2* Safe Start DISABLED
OPTION 3 “Swap Start” – enhanced Safe Start Mode with
extended safety:
To start the Engine: press the SHIFT button and
then the LOCK button. To trigger AUX 2: press
the START/STOP button. Must have
configured option 1 or option 2 in mode 3
function 3.
FUNCTION 2 – Engine Run Time
OPTION 1 Run Time = 4 minutes in GAS mode / 9 minutes
DIESEL mode
OPTION 2* Run Time = 15 minutes in GAS mode / 20
minutes DIESEL mode
OPTION 3 Run Time = 25 minutes in GAS mode / 30
minutes DIESEL mode
FUNCTION 3 – Turbo Mode
OPTION 1 Turbo Mode ENABLED
OPTION 2* Turbo Mode DISABLED
OPTION 3 Turbo Mode ENABLED
FUNCTION 4 – Engine type and Cold Weather Mode
OPTION 1 30-sec delay diesel mode with 20-minute run
time in cold weather mode
OPTION 2* 1-sec delay gas mode with 4-minute run time
in cold weather mode
OPTION 3 7-sec delay diesel mode with 9-minute run time
in cold weather mode
OPTION 4 15-sec delay diesel mode with 9 minute run
time in cold weather mode
FUNCTION 5 – Ignition Valet
OPTION 1 Ignition Valet DISABLED
OPTION 2* Ignition Valet ENABLED
OPTION 3 Ignition Valet ENABLED
MODE 3 * INDICATES DEFAULT SETTING
FUNCTION 1 – Home Valet
TM
OPTION 1 Home Valet ENABLED
OPTION 2* Home Valet DISABLED
OPTION 3 Home Valet DISABLED
FUNCTION 2 – AUX 3 / Zone 3 Programming
OPTION 1 1-sec. output when Trunk button is pressed for
3 sec. with Ignition OFF or under remote run
OPTION 2* Constant output while the TRUNK button is
pressed
OPTION 3 Disarm and rearm pulses with trunk
FUNCTION 3 – AUX 2 Programming
OPTION 1 Constant output while pressing SHIFT followed
by LOCK.
In Safe Start Mode: activate AUX 2 by pressing
the START/STOP button.
OPTION 2* Toggle ON/OFF (with 30-second timeout)
OPTION 3 Horn confirmation when pressing the LOCK
button
OPTION 4 Priority Door Access
FUNCTION 4 – External Trigger
OPTION 1 Zone 3 disarm/rearm (Trunk Pin: a disarm pulse
is sent before the Trunk
opens, the vehicle rearms 4 seconds after the
Trunk is closed).
OPTION 2* Engine Start/Stop
OPTION 3 Key Sense
MODE 4 * INDICATES DEFAULT SETTING
FUNCTION 1 – Multi-Level Features
OPTION 1 Multi-car Features, Basic Features, Customized Features
OPTION 2* Basic Features, Multi-car Features, Customized Features
OPTION 3 Customized Features, Multi-car Features, Basic Features
OPTION4 Basic Features, Customized Features, Multi-car Features
AS-2360TW
Programming Options and Wiring Diagram