User manual

148 MicroMAX System User Manual Version 6.C

ISA HR 320 (NTE with or without shutter)

Remove spectrometer cover

for these screws.

Qty P/N Description

1. 1 2518-0106 Adapter-Female, HR320

2. 3 2826-0087 Screw, M5-10, Flat Head, Socket, Stainless Steel

3. 1 2518-0107 Adapter-Male, HR320

4. 3 2826-0127 Screw, 10-32 × 1/4, Button Head Allen Hex, Stainless Steel

5. 2 2826-0082 Set Screw, 10-32 × 1/4, Stainless Steel, Allen Hex, Nylon Tip

Assembly Instructions

1. Remove the spectrometer cover.

2. Insert part 1 into the spectrometer (dashed line in illustration), fasten with the flathead

screws provided, and replace spectrometer cover.

3. Attach part 3 to the camera with the three (3) 1/4" long button head screws provided.

4. Gently insert part 3 into part 1 and fasten with the setscrews.

3. Replace the spectrometer cover.

Note: Adapter parts are machined to provide a tight fit. It is necessary to rotate the camera

back and forth when inserting into the spectrometer adapter. Do not force the two parts of

the adapter together, as they can be permanently damaged by excessive force.