Install guide

© 2012 Directed. All rights Reserved. 2
QRNDSM50BT 2012-05B
pulse for double pulses); the door lock output turns on again for 20 seconds.
4. Output 1-4 type selects the function of the Output 1-4 wire
• Opt 1 Lock: Output 1 operates as a Lock output
• Opt 2 Unlock: Output 1 operates as an Unlock output
• Opt 3 Trunk: Output 1 operates as a Trunk Release output
• Opt 4 Start: Output 1 operates as a Remote Start trigger output (to an
Add-on remote starter)
• Opt 5 Aux 1: Output 1 operates as the AUX 1 output when activating
from the app
• Opt 6 Aux 2: Output 1 operates as the AUX 2 output when activating
from the app
• Opt 7 OEM Arm: Output 1 operates as Factory Alarm Arm and pulses
prior to the Lock pulse from the system when Locking from the app
• Opt 8 OEM Disarm: Output 1 operates as Factory Alarm Disarm and
pulses prior to the Unlock pulse from the system when Unlocking from
the app
5. Output 2 same option choice and definitions as Output 1 options except
default option is 2: Unlock
6. Output 3 same option choice and definitions as Output 1 options except
default option is 3: Trunk
7. Output 4 same option choice and definitions as Output 1 options except
default option is 4: Start
8. RF Learning 1: Off/Keeloq/Supercode/Astro
• Off (Flex Out): The RF function of the unit is disabled and the Flex Outputs
are active*.
• Keeloq: Directed older generation receiver technology
• Supercode: Directed new generation receiver technology
• Astro: AstroStart receiver technology
NOTE: When setting up the Bluetooth system for an RF Type, you can enter
the remote programming procedure of the host system and proceed through
each option to program the RF output of the Bluetooth system (see RF Learning
Procedure section of this guide for more information).
9. RF Learning 2 (Autostart), HDR-AM type 1,2,3/HDR-FM 1,2/LDR FM
• ASHDRAM: Autostart HDR (AM based) receiver technology
• AS HDR FM: Autostart HDR (new generation FM based) receiver technol-
ogy
• ASLDR: Autostart LDR (older generation) receiver technology
NOTE: When setting up the Bluetooth system for an RF Type, you can enter
the remote programming procedure of the host system and proceed through
each option to program the RF output of the Bluetooth system (see RF Learning
Procedure section of this guide for more information).
10. Factory Reset, returns the system to the factory default settings. When resetting
the unit, the features programming mode exits and is indicated by the LED
flashing Red/Blue for one second. It can be re-entered utilizing the Features
Programming Procedure.
Note: Resetting the unit does not delete the Paired Smartphone from memory
(if one is already programmed).
RF Learning Procedure:
RF Learning 1
When this unit is connected to the RF input of a host system, the easiest way to
program the RF type is to have the host system setup for remote programming and
go through the RF programming setup for the Bluetooth unit (item #8 in features
programming).
1. Enter the Features Option Menu for the Bluetooth module (see Features Pro-
gramming Procedure section)
2. Choose option #8.
3. Enter the Transmitter Learn Routine for the host system.
4. Choose the appropriate RF type.
5. When the correct RF type is chosen, the host system returns a learned confirma-
tion as when programming a remote control (the Bluetooth module sends out a
corresponding signal for the RF type (option) selected).
6. Exit the programming mode on both systems.
7. RF Type is now programmed.
RF Learning 2 (Autostart only)
1. Enter the Features Option Menu for the Bluetooth module (see Features Pro-
gramming Procedure section).
2. Choose Item #9 and select the appropriate option.
3. Put the host system in learn mode.
4. Press and hold Learn button (Autostart requires holding the button for an ex-
tended period).
5. The host system should return a learned confirmation via the Parking lights. If no
reply, then the RF mode is incorrect, try another one.
Optional 8210 RF adapter wiring diagram (if required).
Additional information can
be found at:
www.directechs.com
Notes: Bluetooth response time can vary depending on range and proximity to the
vehicle. Operating temperature range: -30°C to + 70°C.
1
© 2012 Directed. All rights reserved.
Note: Actual Antenna
Control Center may
differ to the example
shown in diagram.
AutoStart
Antenna
Viper, Python
Clifford, XL202
Antenna
AstroStart
Antenna
Original antenna harness
must be used to connect
the antenna in the 8210
Antenna Adapter.
XL202: Range Extender
Antenna/RF
D2D Port
8210 - PKE and SmartStart
Bluetooth RF Harness Adapter
Kit
8210 - PKE and SmartStart
Bluetooth RF Harness Adapter
Kit
Antenna/RF
Remote Start or Security Systems
depending on model.
ON
8 97654321
Antenna/RF
AstroStart Remote Starter
LED
Programming
Button
AstroStart connections:
The green connector on
8210 RF Adapter harness
connect only to AstroStart
Remote Starter XRT, model
RSS-2524. Other models
connect to the large white
4-pin connector.
GreenWhite
White
Green
White
White
Green
Black
Directed SmartStart
BLuetooth Control Module
Black
Green
AutoStart Remote Starter
Antenna/RF
Note: Actual modules may dier
from those shown in diagram and
arrows may not reect actual
connection point.
Autostart RF type Table
RF Menu 9
steps:
Opt 1 Opt 2 Opt 3 Opt 4 Opt 5 Opt 6
RF type: HDR-AM-TYPE1 HDR-AM-TYPE2 HDR-AM-TYPE3 HDR-FM-TYPE1 HDR FM-TYPE2 LDR FM
Model list:
AUTOSTART AS-1775
AS-6270
AS-1475
AS-1470
AS-1271
AS-1272
AS-2371TW-FM
AS-1875FM
AS-2471TW-FM
AS-6870TW-FM
AUTOSTART
USA
AS-2775
AS-1775U
AS-6270U
AS-1475U AS-2272
AS-1272U
AS-1271U
AS-3372TW-FM
AS-2372TWU
AS-3472TW-FM
AS-2472TWU
AS-6870TWU
PolarStart PS-3175
PS-3175E
PS-7270
PS-3675FM PS-7870TWE-FM PS-4461TWE-FM
PS-4661TWE-FM
PS-3655EFM
Nordic Start NS-1074 NS-2430TW-FM
NS-2432TW-FM
NS-5070TW-FM
Command
Start
CS-398i CS-2371TW-FM
CS-2372TW-FM
CS-1875i
CS--2471TW-FM
CS-2472TW-FM
CS-6870TW-FM
Orbit OB-3475
OB-3671
OB2471
Prostart CT-3371
CT-3471
CT-5072
CT-5472
CT-3271
Premier
Defense
PD-2.8 PD-371
PD-372
PD-471
PD-472
PD-870
Visions
AS-2373TW-FM-v AS-2472TW-FM-v
Note: Panic and Trunk may not be supported on all models.