Specifications

28 RSLinx – Training Guide
Lab / Discussion:
1. Start-up RSLinx.
2. Click the Configure Communications Hardware icon.
The Configure Drivers box, seen below, will appear.
3. Pick the hardware device from the Available Drivers list that you intend to use to
communicate with the PLC world and press Add New…
• For the example in this training exercise, we will select the
1784 KT/KTX(D)/PCMK/PKTX(D).
Note: If you are using a hardware device other than the KT that is used in
this example, you can choose that alternate device.
To delete a driver
configured earlier,
click here.