User manual

SETTINGS
July 2012 / WPC / EN 7
4 ACTIVATING AND DEACTIVATING THE WPC
When one of the displays is visible, it is possible to activate or deactivate the WPC. To do this, simply press
the key ESC. The key request on the screen indicates whether you are going to activate or deactivate the
unit.
Once the key has been pressed, you must confirm your choice
by using the key YES. If you do not want the action to be
carried out, it can be cancelled by pressing the NO key.
Note: This is a comprehensive signal and leads to the stoppage or starting of all WPC’s
connected to the remote control.
Putting ON or OFF the system can be easily done directly on the WPC with the button: