User manual

SETTINGS
6 July 2012 / WPC / EN
3 BASIC DISPLAYS
When the remote control is connected to an WPC, it is possible to access to different display menus divided
into distinct categories.
Information on the system
The history of events occurring in the installation
Real time information displays on the operating mode of the
installation
The different measures carried out by the BSP
(Only if a BSP is present)
Adjustment of RCC remote control options
Adjustment of configurations on the WPC(s)
The settings of the BSP
(Only if a BSP is present)
To go from one display to the other, use the keys UP and DOWN on the RCC remote control.
To visualize or modify the options of one of the basic displays, press the key SET when this one is displayed.
Depending on the components connected to your system, it is possible that other displays
complete this serie.
Information
Setting