User manual

SETTINGS
22 July 2012 / WPC / EN
To deactivate:
Parameter
Name
Default
1255
Battery voltage to deactivate (AUX 1)
13.6
1256
Delay to deactivate (AUX 1)
120
1516
Deactivate if battery in floating phase (AUX 1)
Yes
8.3 AUTO START ON BATTERY SOC (ONLY WITH BSI)
The BSI monitors the state of charge(SOC) of the battery. This is the percentage of the remaining
battery energy. The WPC is able to start the generator according to this state of charge.
Parameters for configuring this function are shown below.
To activate:
Parameter
Name
Default
1439
Contact activated with the SOC 1 of battery (AUX 1)
No
1440
Contact activated below SOC 1 (AUX 1)
50
1581
Delay 1 (AUX 1)
12
1582
Contact activated with the SOC 2 of battery (AUX 1)
No
1583
Contact activated below SOC 2 (AUX 1)
30
1584
Delay 2 (AUX 1)
.25
1585
Contact activated with the SOC 3 of battery (AUX 1)
No
1586
Contact activated below SOC 3 (AUX 1)
20
1587
Delay 3 (AUX 1)
0
To deactive:
Parameter
Name
Default
1441
Contact deactivated over SOC (AUX 1)
90
1588
Delay to deactivate (AUX 1)
.25
1589
Deactivate if battery in floating phase (AUX 1)
Yes
8.4 AUTO START ON AC OUTPUT POWER
The WPC is capable of request a start when the AC output power is exceeding a certain value. This
value is a percentage of the nominal power of the WPC (Pnom). By default 70% of Pnom (3000W
for the 24V version) which is 2100W. To prevent this function from acting very rapidly, a delay can
be set. This delay can be set from 0 to 60 minutes, default is 1 minute.
Using multiple power levels allows you to make a difference between a power level which must be
present for a long time before the generator starts, or a higher level at which starting occurs directly
(heavy load, immediate assistance needed).
For the stopping threshold, only one level is available, refer to the parameter list for the numbers.
To activate:
Contact active with inverter power or Smart-Boost (AUX 1)
Default
1258
Inverter power level 1 activate (AUX 1)
Yes
No/Yes
1259
Power level 1 (AUX 1)
70
% Pnom
1260
Time delay 1 (AUX 1)
15
min