User`s guide

12 - 3
Exit Icon
Default EZMenu configuration files contain a section named Exit as a child section of the MenuEntries section.
Enabling the Exit section places this icon on the application window, which allows users to exit. If you want users
to be able to exit the application window, make sure the Exit section is a child of the MenuEntries section. If you want users
to be unable to exit the application window, disable or delete the Exit section.
Start Options
Start Options define the required system parameters for a software application to launch. The following values can be
entered for the StartOption key, wherever it appears:
Option Name The program launches if …
Category
DISABLED
Never, regardless of other startup options specified.
None
COLDBOOT
The terminal has performed a factory reset.
Boot type
WARMBOOT
The terminal has performed a reboot.
TOUCH
The terminal has a touch screen display installed.
Touch Screen
NONTOUCH
The terminal doesn’t have a touch screen display installed.
BATCH
The terminal is a batch unit (no RF or internal modem cards installed).
Mobility
RF
The terminal has an RF card installed (e.g., Cisco 802.11b).
GSM
The terminal has a GSM radio.
BT
The terminal has a Bluetooth radio.
MODEM
The terminal has an internal modem card installed.
IMAGER
The terminal has an imager installed.
Scanner
LASER
The terminal has a laser scanner installed.
BLIND
The terminal has no laser or imager installed.
ANYSCAN
The terminal has either an imager or a laser scanner installed.
RFON
The RF radio is Enabled.
Radio
GSMON
The GSM radio is enabled.
BTON
The Bluetooth radio is enabled.
RFGSMBTOFF
The RF, GSM, & Bluetooth radios are disabled.