User`s guide

11 - 1
11
SysInfo
SysInfo
SysInfo provides a read-out of important system information including firmware versions, DLL versions, system parameters, as
well as network and radio information.
To See System Information
Tap the SysInfo icon once. SysInfo queries the system, compiles the data, and displays a read-only file on the SysInfo screen.
This information is gathered from the Dolphin terminal and changes only when the terminal’s configuration has changed. To
refresh the system information, go to
File > Refresh . The system re-compiles system information.
To Save the System Information to a Text File
Tap File > Save to File . A file named “SYSINFO.txt” is generated and saved to the folder specified in the prompt.
To open the file, tap
Start > File Explorer . Navigate to the Honeywell folder. The SYSINFO.txt file appears in the list. If you
tap on the SYSINFO.txt file, the file opens in Pocket Word. You cannot change system information by editing the text.
To Upload SYSINFO.txt to a Workstation
You can upload the SYSINFO.txt file to a workstation via ActiveSync.
1. On the workstation, open Windows Explorer.
2. Navigate to the
Mobile Device folder.
3. Double click
My Windows Mobile-Based Device and navigate to the Honeywell folder. The SYSINFO.txt file appears here.
4. Copy this file to your workstation.