User`s guide

7 - 3
Clear
Executing this command clears routing tables of all gateway entries.
On the Input tab, tap
CLEAR and tap Execute . The system processes your request and the number of entries deleted
appears on the Output tab.
IP Config
IPConfig is a kernel utility that displays, releases, and renews IP parameters for on-board network adapters. IP Config contains
three tab windows: Input, Output, and About. The following fields appear on the Input tab:
Displaying the Terminal’s IP Configuration
On the Input tab, tap the Display full configuration button. The Dolphin terminal retrieves and displays the IP configura-
tion for the entire terminal.
Ping
Ping provides a GUI-based version of the traditional command line ping utility. Pinging sends out an echo request to a specific
computer on the network. Use Ping to verify communication links or to make sure a specific IP address is working.
Field Description
Adapter
This drop-down list contains the network adapters currently installed in the Dolphin terminal.
Every field and button on this screen pertains to the adapter selected in this drop-down list.
MAC Addr
Displays the MAC (Media Access Control) address of the selected Adapter. This is the serial
number burned into the adapter that uniquely identifies it.
IP Addr
Displays the IP address.
Subnet Mask
Displays the adapter’s subnet mask. The subnet mask determines the subnet upon which the
adapter resides.
Gateway
Displays the adapter’s gateway information.
Release the IP address
Click this button to release the IP address.
Renew the IP address
Click this button to renew the IP address.
Display full
configuration
Click this button to retrieve and review the full configuration of the terminal’s IP setup. For more
information, see below.