Service manual

2) If bottom air intake is required, just change the position of square flange and air intake cover.
3) Rivet the intake pipe to the air intake of indoor unit and another end to the intake window. For free
adjustment of the height, you may fabricate a section of canvas duct and reinforce with 8# iron wires
in folded form. The user may select the installation method in unified consideration of the
constructions and maintainability. See Fig.11-10.
送风
1
回风
2
5
4
4
送风
6
1 回风
5
3
S/N Description S/N Description
１
Intake Window
(with filter)
４
Indoor Unit
２
Canvas Duct
５
Outlet Pipe
３
Intake Pipe
6
Test Grill
Fig.11-10
11.3.6 Installation of Round Outlet Pipe
Fig.11-11
Air Outlet
A
ir Intake
A
ir Outlet
A
ir Intake
Installation Drawing (Round Air Port)
This drawing illustrates the installation of round air port on the
air duct unit with a cooling capacity of 1000W-1200W.
This drawing illustrates the installation of round air port on the
air duct unit with a cooling capacity of 6500W-8000W.
Line up the holes and connect securely
Indoor Unit
Indoor Unit
Round Air Port
Round Air Port
Line up the holes and connect securely.
95