Service manual

Operating Procedures
Illustration
2) Remove the gas-liquid
separator
● Loosen the screws fixing the
gas-liquid separator.
(See Fig. 22)
(7) Remove the gas valve and
liquid valve
1. Remove the gas valve
● Loosen the two bolts fixing the gas
valve.
● Cut the weld between gas valve and
gas return pipe. Remove the gas
valve. (See Fig. 23).
Note: When cutting the weld, the valve
body shall be completely wrapped
with wet cloth in order to avoid
damage under high temperature.
2. Remove the liquid valve
● Loosen the two bolts fixing the liquid
valve.
● Cut the weld between liquid valve
and gas return pipe. Remove the
liquid valve. (See Fig. 24)
Note: When cutting the weld, the valve
body shall be completely wrapped
with wet cloth in order to avoid
damage under high temperature.
Fixing screw
Fig.22
Fig.23
Fig.24
Gas Valve
Bolt
Li
q
uid Valve
Bolt
64