Service manual

Operating Procedures
Illustration
3) Remove the exhaust temperature
sensor
● Pull off the exhaust temperature
sensor inserted to the exhaust pipe.
Remove it with the communication
wire. (See Fig. 15)
4) Remove the high pressure switch
● Pull off the high pressure switch
inserted to the exhaust pipe.
Remove it with the communication
wire. (See Fig.16)
5) Remove the low pressure switch
● Pull off the low pressure switch
inserted to the suction pipe.
Remove it with the communication
wire. (See Fig. 17)
6) Remove the defrost temperature
sensor
● Plug off the defrost temperature
sensor inserted to the condenser.
Remove it with the communication
wire. (See Fig. 18)
Exhaust temperature sensor
Fig.15
High pressure switch
Fig.16
Fig.17
Defrost temperature sensor
Fig.18
62