Service manual

Operating Procedures
Illustration
(5) Remove the electric box
1) Remove the electric box
● Loosen the screws fixing the electric
box. Remove the pressure switches
and temperature sensors. Use your
hand to lift upward to remove the
electric box. (See Fig. 13)
(6) Remove the compressor
and gas-liquid separator
● Loosen the insert on the electrical
terminal of the compressor. (See Fig.
14)
●Cut the suction and exhaust pipe of
the compressor. (See Fig. 14)
● Loosen the nuts fixing the
compressor. Remove the
compressor and gas-liquid
separator.
Sound absorption sponge
Fig.13
Gas-liquid separator Compressor
Fig.14
50