Service manual

Operating Procedures Illustration
(7) Remove the gas valve
and liquid valve
1. Remove the gas valve
● Loosen the two bolts fixing the
gas valve.
● Cut the weld between gas valve
and gas return pipe. Remove the
gas valve. (See Fig. 12)
Note: When cutting the weld, the
valve body shall be completely
wrapped with wet cloth in order to
avoid damage under high
temperature.
2. Remove the liquid valve
● Loosen the two bolts fixing the
liquid valve.
●Cut the weld between liquid valve
and gas return pipe. Remove the
liquid valve. (See Fig. 13)
Note: When cutting the weld, the
valve body shall be completely
wrapped with wet cloth in order to
avoid damage under high
temperature.
Fig.12
Fig.13
Gas Valve
Bolt
Li
q
uid Valve
Bolt
41