Service manual

Operating Procedures Illustration
4) Remove the front plate
● Loosen the tapping screws fixing the
front plate. Remove the front plate.
(See Fig. 4)
(2) Remove the axial flow fan
● Loosen the ball nuts fixing the axial flow
fan and remove the lock washer. (See
Fig. 5)
● Pull outward to remove the axial flow
fan. (See Fig. 5)
(3) Remove the fan motor
● Loosen the screws fixing the motor
support. Remove the motor support.
(See Fig. 6)
Fig. 4
Fig. 5
Fig.6
38