Service manual

8.2 Removal Procedures for Outdoor Unit ASD-09A/12A/18A
Operating Procedures Illustration
(1) Remove the front case
1) Remove the panel
● Loosen the two tapping screws fixing the
front grill.
● Pull downward to remove the front grill.
(There is a clamp on the back of the
front grill)
(See Fig. 2)
2) Remove the top cover.
● Loosen the tapping screws fixing the top
cover. Remove the top cover.
(See Fig. 3)
3) Remove the protection grill
● Loosen the tapping screws fixing the
protection grill. Remove the protection
grill.
(See Fig. 3)
Fig. 1
Fig. 2
Fig. 3
37