Service manual

8. Removal Procedures
8.1 Removal Procedures for Indoor Unit ASD-09A/12A/18A
Operating Procedures Illustration
(1) Remove the outdoor case
1) Remove the filter of rear air intake.
● Pull out the two filters of rear air
intake.
(See Fig. 1)
2) Remove the side plate of rear air
intake.
● Loosen the screws fixing the rear
air intake and remove the side
plate. (See Fig. 2).
3) Remove the cover of air intake.
● Loosen the screws fixing the cover
of air intake and remove the cover.
(See Fig. 3)
Filter of air intake
Fig. 1
Fig. 2
Cover of air intake
Fig. 3
33