Operating instructions

7.4 Cleaning air-cooled condenser
Personnel:

Operating personnel
1. Switch off the device.
2. Remove the front panel carefully. Pull the panel to the front
by gripping the recess and lift the panel out of the guide for
this.
The front panel is held in place by a magnetic
catch.
3. Brush off or vacuum the condenser.
4. Replace the front cover carefully.
7.5 Cleaning water filter
Personnel:

Operating personnel
1. Switch off the device using the mains power switch.
2. Undo the nut of the threaded connection at the water cooling
inlet.
3. Remove the olive with the cooling water tube from the
threaded connection.
4. Remove the water filter from the threaded connection care-
fully.
5. Clean the water filter and then put it back into the threaded
connection.
If necessary, use tweezers for the insertion.
6. Screw the olive with the cooling water tube with the nut on
the threaded connection of the inlet.
Fig. 69: Remove the front panel
Fig. 70: Removing water filter
Maintenance
Variocool 72