Operating instructions

afterwards (- - - -, edited)

No. Tend hh mm Tol Pum

S1 S2 S3

Start 30.00 -- -- 0.1 --- off off off

2 50.00 0 20 0.0 --- off off off

3 50.00 0 20 0.1 --- off off off

4 70.00 0 20 0.0 --- off off off

5 70.00 0 10 0.8 --- off off off

6 60.00 0 30 0.0 --- off off off

7 30.00 0 0 0.0 --- off off off

The entered tolerance can have a great influence for external bath

control. The graph on the side of the edited profile clarifies the pos-

sible run-on of the actual temperature in the bath vessel (solid line)

for the setpoint value of the programmer (grey background).

Fig. 60: Program tolerance

Note:

Operation

Variocool 64