Operating instructions

6.15.5 Displaying device type
The device type is shown directly at the menu item Type in the
Device Status menu.
6.15.6 Displaying serial numbers
Personnel:

Operating personnel
1. Select the menu item Serial numbers in the Device Status
menu.

The serial number of the device is displayed. The serial
numbers of connected modules are also displayed if they
are available.
6.16 Programmer
6.16.1 Program example
The programmer function enables you to save a temperature/time
program. The program consists of several temperature/time seg-
ments and details about their repetition. Possible are ramps, tem-
perature jumps (time is zero) or also temperature holding phases
with identical start and end temperature in the segment. During the
start, the current setpoint is stored as the starting value of the first
segment.
The total number of freely programmable segments is
150.
Five temperature/time programs can be stored.
Setting Description
No. Segment number of the program
Tend End temperature to be reached
hh Time in hours (hh) in which the specified
temperature should be reached
mm Time in minutes (mm) in which the specified
temperature should be reached
Fig. 58: Serial numbers
Possible settings
Operation
Variocool 62