Operating instructions

2. You can navigate through the list using the UP and DOWN
arrow buttons.
The following information is displayed for each message:
 The relevant module which causes the message is dis-
played under Source .
 Code is the coded alarm, warning or error description.
 Type specifies alarm, warning or error.
 The exact time of the message is displayed with Date
and Time
A list of the possible alarms, warnings and errors
can be found in
Ä ‘Procedure in the event of
alarms’ on page 74.
6.15.3 Retrieving device data
1. Select the menu item Device data
in the Device Status
menu.

Various parameters are displayed.
6.15.4 Retrieving software version
Among other things, the relevant software versions are needed for
service cases.
Personnel:

Operating personnel
1. Select the menu item SW version in the Device Status
menu.

The corresponding software versions are displayed
depending on device type and connected modules.
Fig. 55: Errorstore
Fig. 56: Device data
Fig. 57: Software version
Operation
Variocool 61