Operating instructions

2.
Select the menu item Setup  Calibration
 Factory Calibration.
3. Select one of the following options:
 Selecting no returns to the previous display without
making any changes.
 Selecting yes restores the factory calibration.
6.14 Restoring factory settings
Personnel:

Operating personnel
1. Change to the main menu.
2.
Select the menu item Setup  Factory settings.
Personnel:

Operating personnel
1. Select the menu item Control .

This takes you to a list using which you can reset the
parameters individually.
2. Select the appropriate menu item in the parameter list.
 The internal control parameters can be reset using
ctrl.parameter intern .
 The external control parameters can be reset using
ctrl.parameter extern .
 The settings for the internal sensor can be reset with
intern Pt1000 .
 Setpoint and maximum current consumption can be reset
with miscellaneous . The control is also set to internal
control.
Fig. 49: Factory calibration setting
Fig. 50: Restoring factory calibration
Navigating to the factory settings
Restoring individual settings
Fig. 51: Selecting mode
Fig. 52: Resetting control parameters
Operation
Variocool 59