Operating instructions

Personnel:

Operating personnel
1. Change to the main menu.
2.
Select the menu item Setup  Control  Setpoint offset.
3. Select one of the following options:
 With Offset source , you can specify which source to use
to measure the offset.
 With Diff. set/actual value , you can specify the offset.
Personnel:

Operating personnel
1. Select the menu item Offset source in the Setpoint offset
menu.
2. Select one of the following options:
 You deactivate the setpoint offset using off .
 You can select the appropriate source with the other
menu items. For example, with extern Pt100 , you can
define the setpoint offset via an external temperature
sensor.
The LEFT arrow button takes you to the previous
display without changes.
3. Confirm with the OK button.
Personnel:

Operating personnel
1. Select the menu item Diff. set/actual value in the Setpoint
offset menu.

An input window is displayed.
2. Adjust the offset value within the displayed limit values.
3. Confirm with the OK button.
Navigating to the settings
Fig. 30: Setpoint offset menu
Specifying offset source
Fig. 31: Adjusting setpoint offset
Specifying offset
Fig. 32: Specifying offset
Operation
Variocool 48