Operating instructions

Personnel:

Operating personnel
1. Change to the main menu.
2.
Select the menu item Setup  Temp. limits.
3. Select one of the following options:
 Select the first entry Til to set the lower limit value.
 Select the second entry Tih to set the upper limit value.
4. Adjust the value in the following input window.
6.7 Specifying setpoint value
Personnel:

Operating personnel
1. Change to the main menu.
2. Select the menu item Setpoint Value in the main menu.

An input window is displayed. The cursor under the value
flashes. The setpoint value can be adjusted within the
displayed limit values.
3. Adjust the setpoint value accordingly.
4. Confirm with the OK button.
6.8 Activating and deactivating standby
During standby operation, the components of the device such as
the pump are switched off. The display remains active.
Fig. 25: Selecting temperature limit
value
Fig. 26: Defining temperature limit
value
Fig. 27: Specifying setpoint value
Operation
Variocool 46