Operating instructions

1. Touch the grounded, bare metal stainless steel rear side of
the circulation chiller to discharge any electrostatic charge.
2. Remove the module from the packaging.
3. Switch off the circulation chiller and unplug the mains plug.
4. The module slots are protected with a cover. Undo the
screws of the cover for the appropriate module slot and
remove the cover carefully.
5. Carefully detach the bus connection cable from the cover.
6. Attach the bus connection cable - red plug to red socket.
The connectors have polarity protection.
7. Insert the module into the appropriate slot and fasten it using
the two Philips screws.
Before commissioning
Variocool 32