Operating instructions

“This Class A digital apparatus complies with Canadian ICES-003”
(ICES = Interference Causing Equipment Standards)".
« Cet appareil numérique de la classe A est conforme à la norme
NMB-003 du Canada ».
4.2 Placement
Very specific placement conditions are applicable for the devices.
These placement conditions are mainly specified in the technical
data of the device.
Further information about the technical data can be
found in
Ä Chapter 11.1 ‘General data’ on page 82.
Additional placement conditions are described below.
 Toxic vapours can be produced depending on the heat transfer
liquid used and type of operation. Ensure sufficient extraction
of the vapours.
 Observe the requirements of the device for electromagnetic
compatibility (EMC).
 Do not cover the ventilation openings.
Further information about EMC requirements can be
found in
Ä Chapter 4.1 ‘EMC classification’ on page 23.
Personnel:

Operating personnel
WARNING!
Rolling or toppling of the device from incorrect han-
dling
Impact, crushing
 Do not tilt the machine.
 Place the device on a level, skid-free surface with
sufficient load bearing capacity.
 Engage the reel brake when setting up the device.
 Do not place any heavy parts on the machine.
1. Place the devices on a suitable base.
The devices can be moved. Release the locking
brakes of the castors for this by pressing the lever
upward.
Instructions for Class A digital
device, Canada
Before commissioning
Variocool 24