User Manual

13
* Varies depending on amp draw in battery
LOAD CAPACITY
The load capacity rating is stamped on a metal plate attached to the lift. This figure is a
net capacity rating for a lift furnished with the standard platform. Lifts should not be
overloaded beyond the established capacity as damage and/or personal injury
may result.
DANGER!
Do not make modifications to the lift without authorization from the
manufacturer. Autoquip is not responsible for injury or damage
which results from the unauthorized & unforeseen misuse of the lift.
UNBALANCED LOADING
The stabilization provided is basically for balanced loads. If special attachments are
required which extend beyond the length and/or width dimensions of the platform,
contact Autoquip for a recommended & safe solution.
PUMP PRESSURE
The pump can operate efficiently at intermittent pressures up to 3200 PSI and
continuous duty to 2500 PSI. The safety relief valve in the pump assembly is factory-
set to stay within the parameters of the pump and lift requirements.
Series 35
Model
Capacity
(lbs)
Travel
(In.)
Lowered
Height
(Inches)
Raised
Height
(Inches)
Max End
Load
(lbs)
Max Side
Load
(lbs)
Standard
Platform
(Inches)
Raise
Time
(sec)
No
of
Cyl
Ship
Wt
(lbs)
24SRV25 2500 24 14 38 2500 1500 24 x 36 8* 1 910
24SRV40 4000 24 14 38 3000 1500 24 x 36 11* 1 950
24SRV60 6000 24 14 38 3500 1500 24 x 36 16* 2 1000
36SRV25 2500 36 14 50 2500 1500 24 x 48 12* 1 1000
36SRV40 4000 36 14 50 3000 1500 24 x 48 17* 1 1050
36SRV60 6000 36 14 50 3500 1500 24 x 48 25* 2 1100
48SRV25 2500 48 14 62 2500 1500 24 x 64 16* 1 1200
48SRV40 4000 48 14 62 3000 1500 24 x 64 22* 1 1250
48SRV60 6000 48 14 62 3500 1500 24 x 64 33* 2 1300
SPECIFICATIONS