User guide

10
Model #
Lifting
Capacity
Platform
Dimensions
Base
Dimensions
Lowered
Height
Shipping
Weight
SRP-3625
2,500 36 x 36 24 x 24 10 385
SRP-3640
4,000 36 x 36 24 x 24 10 385
SRP-3660
6,000 36 x 36 24 x 24 10 385
SRP-4225
2,500 42 x 42 24 x 24 10 450
SRP-4240
4,000 42 x 42 24 x 24 10 450
SRP-4260
6,000 42 x 42 24 x 24 10 450
SRP-4248-25
2,500 42 x 48 24 x 24 10 485
SRP-4248-40
4,000 42 x 48 24 x 24 10 485
SRP-4248-60
6,000 42 x 48 24 x 24 10 485
SRP-4825
2,500 48 x 48 24 x 24 10 525
SRP-4840
4,000 48 x 48 24 x 24 10 525
SRP-4860
6,000 48 x 48 24 x 24 10 525
LOAD CAPACITY
The load capacity rating is labeled on the top of the turntable platform. Turntables
should not be overloaded beyond the established capacity as damage and/or
personal injury may result.
When attaching the turntables to other pieces of equipment such as scissors lifts,
remember that the rated capacity of the turntable must not exceed the rated capacity of
the lift, tilter, etc.
UNBALANCED LOADING
Most standard turntable capacities assume that the load on the turntable is uniformly
distributed. If eccentric or edge loading of the turntable platform is required, the ring
bearing design should be chosen over the standard chain and sprocket design.
SPECIFICATIONS