Instruction Manual

54
24"
DOWN SOLENOID
18"
MOUNTING BRACKETS
(SUITABLE FOR FLOOR OR WALL MOUNTING)
4.5 GAL. USEABLE (WALL MOUNT)
3.3 GAL. USABLE (FLOOR MOUNT)
5 HP CONTRACTOR
SUPER TORQUE
TENV MOTOR
12"
NOTES:
1. APPROXIMATE OVERALL DIMENSIONS OF
POWER UNIT - 24" x 18" x 12" HIGH.
2. CONTROLS PER QUOTATION.
WALL MOUNT
INSTALLATION
SHOWN
FILLER BREATHER
CAP
OIL CAPACITY
5.6 GAL. 9" x 9" x 18"
POLYEHTYLENE TANK
FLOW CONTROL W/
3/8" NPT PRESSURE
PORT
CONTROL PANTEL
(9"W x 8"DP x 13"H)
TRANSFORMER, STARTER, &
CONTACTOR PRE-WIRED TO
TERMINAL STRIP.
(SHIP LOOSE)
4
826-0084-0 REV 4, 10-11-05 826-0084-0
AUTOQUIP CORP.
1058 W.INDUSTRIAL AVE.
GUTHRIE, OK 73044-1058
888-811-9876 WWW.AUTOQUIP.COM
COPYRIGHT RESERVED
AUTOQUIP CORPORATION 2005
(NOT TO SCALE)
PUSHBUTTON
HAND HELD
WALL MOUNTED.
(SHIP LOOSE.)
OR
2.8 GPM PUMP W/ INTERNAL CHECK, RELIEF, DOWN VALVE
Figure 27: Diagram - Contractor Power Unit
REPLACEMENT PARTS LIST
- Contractor Power Unit -