Instruction Manual

42
WARNING: ELECTRICAL HAZARD. DISCONNECT POWER BEFORE WIRING USE 3/16" WIRE TABS FOR WIRING EXCHANGE BLACK AND RED WIRES IF TO EXISTING 16/4 SO CONTROL CORD DESIRED TO SWITCH "UP" AND "DOWN" COLOR CODING SHOWN CORRESPONDS FOOTSWITCH. FUNCTIONS.
4. 3. 2.
ON LIFT. WIRING THIS ACCESSORY.
1.
TO SATISFY LOCAL CODES (BY OTHERS).
1
DOWN
INSTALL FOOTSWITCH GUARD PER MANUFACTURER'S INSTRUCTIONS. LABELS TO TOP OF COVER AS REQUIRED. INSTALLER TO APPLY "UP" AND "DOWN"7.
6.
USE APPROPRIATE WIRE, CONDUIT, ETC.5.
2
UP
STANDARD FOOTSWITCH ASSEMBLY
FOOT GUARD PAINTED YELLOW 15 AMP, 115/230VAC ELECTRICAL RATING WITHOUT CORD
9. 8.
Figure 20: Guarded Foot Switch Wiring Diagram
GENERAL MAINTENANCE