Instruction Manual

90
DANGER!
To avoid personal injury or death, the procedures described in this section
should only be performed by qualified service personnel.
WARNING!
Never operate the lift by “manualling” the electrical controls (using the
contactors located inside the control panel). All safety devices are by-
passed in this mode of operation and lift damage or severe personal injury
could occur.
ADJUSTING LEVEL & OVER-TRAVEL LIMIT SWITCHES
To ensure proper setting and performance of all Level Limit Switches and Over-Travel
Limit Switch, follow the procedure set forth in Paragraph Kof the “Installation” section.
NOTE: Should you have any questions or need assistance please call Autoquip
Customer Service (888-811-9876).
ADJUSTING SLACK CHAIN SENSING SWITCHES
WARNING!
Slack chains require factory help! Do not attempt to repair slack chain
conditions alone! Always contact the local representative or call the
Autoquip Service Department at 888-811-9876.
To ensure proper setting and performance of all Drive Chain & Lifting Chain Sensing
Switches, follow the procedure set forth in Paragraph L of the “Installation” section.
GENERAL MAINTENANCE