Owner manual

60
CONTRACTOR POWER UNIT
-- (Reference Figure 13A & 13B)
PART # DESCRIPTION
65750040 HYDRAULIC SCHEMATIC
6430633X Contractor P.U. Assembly without Sol. Coil (select coil below)
64201020 Polyethylene Reservoir (9” x 9” x 18”)
47701640 Filler Breather Cap
30600613 5 HP Contractor Motor; 208-230-460V / 60CY / 3 PH:
Tang Shaft, C-Face, Foot Mt,
40200655 Pump, 2.8 GPM, Tang Shaft; without Sol. Coil (select coil below)
41502840 Down Flow Control Valve; 3.0 GPM
41050139 Suction Strainer (Reservoir)
32701290 Solenoid Coil 24Volt AC (Down Valve )
32701300 Solenoid Coil 115 Volt AC (Down Valve)
35194090 Up/Down Pushbutton Kit (Wall Mount or Handheld PB) with
20 Ft. Straight Cord
35150140 Controller Assembly : 208 – 230 Volt /60Hz/3PH ; 24Volt Control
Voltage
35150145 Controller Assembly : 208 – 230 Volt /60Hz/3PH ; 115Volt Control
Voltage
35150150 Controller Assembly : 460 Volt /60Hz/3PH ; 24Volt Control Voltage
35150155 Controller Assembly : 460 Volt /60Hz/3PH ; 115Volt Control
Voltage
REPLACEMENT PARTS LIST
Contractor Power Unit
12