User Manual

WIRING AUTOQUIP "SUPER TORQUE' MOTORS

Because Autoquip "Super-Torque" motors actually deliver substantially more

horsepower than their nameplate rating, they must always be wired for heavier current-

draw than standard motors of the same nameplate rating. However, because of the

"Super-Torque" motors starting efficiency and superior running characteristics, circuit

components do not have to be as large as for standard motors of equal delivered

horsepower.

The following chart should be observed in connecting these motors to power

sources, remembering that, where 115-Volt operation is contemplated, the current-

draw is too heavy for plugging into ordinary lighting circuits. Heavy wire must be

used all the way to the power-source.

NOTE: For larger horsepower motors, consult factory.

MOTOR CONNECTION DIAGRAMS

HP and Voltage Full Load Amperages

1/2 HP: 115 V /60 CY/1 PH (36S15)

115 Volts = 15.0 Amps

3/4 HP: 115 V /60 CY/1 PH

115 Volts = 16.6 Amps

3/4 HP: 230 V /60 CY/1 PH

230 Volts = 8.3 Amps

3 HP: 115 / 208 / 230V /60 CY/1PH 115 V = 33.6 Amps 208/230V=16.8 Amps

5 HP: 230 V /60 CY/1 PH 230 Volts = 23.0 Amps

1-1/2 HP: 208 / 230 V /60 CY/3 PH

208 / 230 V= 5.3 Amps

1-1/2 HP: 460 V /60 CY/ 3 PH

460Volts = 2.85 Amps

5 HP: 208 / 230 V /60 CY/3 PH

Intermittent Duty Motor

208 V=15.8 Amps 230 V=14.8 Amps

5 HP: 460 V /60 CY/3 PH

Intermittent Duty Motor

460 Volts = 7.4 Amps

5 HP: 208 / 230 V /60 CY/3 PH

Heavy Duty Motor

208 V=16 Amps 230 V=15.2 Amps

5 HP: 460 V /60 CY/3 PH

Heavy Duty Motor

460 V=7.6 Amps

GENERAL MAINTENANCE