User guide

P/N. 11016-001 Rev. January 7, 2005 Page 3-15
User Guide
AutoPulse™ Resuscitation System Model 100
3.7 Viewing AutoPulse Platform Information
On initial power-up, pressing the Menu/Mode Switch button allows you to access the information about:
1. The last patient session
2. The AutoPulse Platform
3. The AutoPulse Platform Battery
The same information may also be accessed from the Administrative Menu (refer to section Section 2.3,
“Administrative Menu: user pre-set options,” on page 2-9).
Once the Menu or Administrative Menu is active use the Move Up and Down arrow buttons to highlight
the desired menu item and the Select Choice Button to select it.
Information presented about the Last Patient session is:
• Total compressions
• Total active time (min:sec)
• Total pause time (min:sec)
The last patient session data is updated after the AutoPulse is power cycled and one complete
compression occurs.
Information presented about the AutoPulse Platform is:
• Model number
• Serial number
• Software version
• Name of manufacturer
• Manufacturer location (city, state, country)
Information presented about the AutoPulse Platform Battery is:
• Battery serial number
• Number of charge cycles performed (refer to the AutoPulse Power System User Guide for more
information).
From any of the information displays, press the gray Menu/Mode Switch button under the word “back”
to return to the main Menu or Administrative Menu.