User guide
Page 3-8 P/N. 11016-001 Rev. January 7, 2005
User Guide
AutoPulseâ„¢ Resuscitation System Model 100
2. Press and release the Start/Continue button once. The AutoPulse Platform automatically adjusts the
bands to the patient's chest (see Figure 3-9) and determines the appropriate compression.
Note: Do not touch the patient or the LifeBand CCA while the AutoPulse Platform is analyzing
the patient’s size.
Figure 3-9 Analyzing Patient Size Display Panel Screen
3. Verify that the patient is properly aligned and that the LifeBand CCA has taken up any slack in the
bands (see Figure 3-10).
Note: If the patient is not properly aligned, press the Stop/Cancel button, realign the patient, and
begin compressions again with step 1 on page 3-7.
Figure 3-10 Verifying Patient Alignment Display Panel Screen